高性能片式多层氧化锌压敏电阻器材料研究

对非Bi系氧化锌压敏电阻材料进行了系统研究。研究结果表明:在ZnO基体材料中,添加适量PbO、Co2O3、Cr2O3、MnO2、ZrO2、TiO2、Sb2O3 、B2O3等非Bi系添加剂,采用传统陶瓷制备工艺和合适烧结工艺,可获得a >50、IL<1 mA、烧结温度低于1 100℃的实用非Bi系氧化锌电阻瓷料。采用该瓷料,利用MLC工艺,选用Pd30/Ag70电极浆料,制作出V1mA<30 V、a >30、IL<1 mA的片式多层压敏电阻器。     

Hydrothermal Synthesis and Low-Temperature Sintering of Zinc Gallate Spinel Fine Particles

Nanosized powders of single-phase zinc gallate (ZnGa₂O₄) spinel were hydrothermally synthesized from solutions in the presence of NaOH over the pH range of 1.9 to 7.0 and from solutions above pH 7.0, i.e., the very basic medium (pH of 13.85), by removing the residual ZnO phase by washing with aqueous H₂SO₄ from the precipitate mixtures of zinc gallate spinel particles and ZnO. A very wide compositional range (Zn/2Ga = 0.705–1.157) of zinc gallate spinel solid solutions could be hydrothermally synthesized in the form of nanosized particles from acid and very basic mediums (pH of 2.4–13.85) in the presence of NaOH. These hydrothermally synthesized spinel powders showed good sinterability and almost full densification at 1100°C for 1 h. Dense sintered bodies consisting of single-phase zinc gallate spinel were fabricated at 1100°C using zinc gallate spinel powders having almost stoichiometric composition formed from the solution at pH 9.95 in the presence of aqueous ammonia.     

High-temperature,high-pressure thermophysical measurements on liquid zinc

Wire-shaped zinc samples were resistively volume heated as part of a fast-capacitor discharge circuit. Time-resolved measurements with submicrosecond resolution of the current through the specimen, the voltage drop across it, and the thermal expansion of the specimen as a function of time allow determination of the enthalpy, electrical resistivity, and density at different temperatures up to superheated liquid states of zinc far above the normal boiling point. High static pressures, up to 3800 bar of the ambient medium water, were used. An estimate of the critical pressure for zinc is given by investigations of the stability of the sample with a framing CCD camera, taking pictures of different samples varying the ambient static pressure. The critical volume and the critical temperature are obtained by means of an extrapolation of measured data at different pressures.Paper presented at the Fourth International Workshop on Subsecond Thermophysics, June 27–29, 1995, Köln, Germany.     

Effects of Trace Zinc on Toughening and Strengthening of Steels

ＥｆｅｃｔｓｏｆＴｒａｃｅＺｉｎｃｏｎＴｏｕｇｈｅｎｉｎｇａｎｄＳｔｒｅｎｇｔｈｅｎｉｎｇｏｆＳｔｅｅｌｓＳｈｉＣｈｏｎｇｚｈｅ①ＡＢＳＴＲＡＣＴＩｍｐａｃｔｂｅｎｄａｎｄｓｔａｔｉｃｔｅｎｓｉｌｅｃｏｍｐａｒｉｓｏｎｔｅｓｔｓａｒｅｃａｒｒｉｅｄｏ...     

Production and properties of micro‐porous glas bubble zinc and aluminium composites

Micro‐porous syntactic foams were produced by means of integration of glass bubbles into aluminium and zinc matrices. Preforms of glass bubbles were pressure infiltrated with the alloys AlSi9Cu9 ans ZnAl4Cu using squeeze casting. The preforms were sintered thermically without the use of bonding agents. Using the combination of different sintering steps syntactic foams with locally different densities could be produced. The mechanical properties of the foams were tested indicating a high compression strength of the foams and a very good compression energy absorption. Furthermore, corrosion behaviour and behaviour at higher temperatures were investigated.     

电子辐照加速器大功率工频高压电源

文章介绍目前两种用于烟气脱硫加速器的不同形式直流高压电源，分析了它们各自的特点。针对它们存在的不足之处，提出了一种全新的倍压型桥式整流线路，并对此线路进行了理论推导和计算机模拟仿真。     

Vinyl acetate monomer—a pilot plant study

The kinetics of the reaction of acetic acid and acetylene over zinc acetate-activated carbon catalyst was investigated over a wide range of process variables in a pilot reactor. Although various catalytic reaction mechanisms were postulated, the rate of reaction was most satisfactorily correlated by a mechanism of surface reaction between charged adsorbed acetic acid and acetylene, which assumes that the rate controlling step was the irreversible charged adsorption of acetylene and acetic acid.     

低碳钢热浸Zn-0.15%Ni合金镀层组织及第二相粒子

采用热浸Zn-Ni合金镀锌方法，在含0.03%-0.36%Si的低碳钢上获得Zn-Ni合金镀层，研究了镀浴中Ni含量和钢中Si含量对镀层中δ相和ζ相生长速率的影响，以及Zn-Ni合金镀层η相中的第二相粒子即Zn-Fe-Ni三元化合物Γ2相粒子的形成和长大过程，结果表明，在Zn-0.15%Ni镀浴中，含硅0.03%-0.215%钢镀层的ζ相明显受到抑制，δ相厚度略有增加，Γ2相粒子的形成和长大过程包括ζ相的溶解，Γ2相的形核和成比例吸收铁，镍而长大。     

镀锌层银盐黑色钝化工艺

在含ＡｇＮＯ３０．５～１ｇ／Ｌ，ＣｒＯ３５～１０ｇ／Ｌ，Ｈ２ＳＯ４０．５～１ｍｌ／Ｌ，光泽控制剂１０～２５ｍＬ／Ｌ的钝化液中处理镀锌层，可获得结合力良好、光亮的黑色钝化膜。     

换热器防腐蚀方法介绍

文章对换热器的不同保护方法进行了介绍 ,重点讨论了渗铝、渗锌两种方法。在室温～ 80℃自来水和 3.5 %NaCl水溶液中 ,与碳钢基体相比 ,渗铝层的电位发生了反转 ,因而在针孔部位会形成大阴极小阳极的局面 ,易发生点蚀 ;而在相同条件下渗锌层不出现上述点蚀现象 ,更适宜在换热器的应用